'S' Pulling Tools

	'S' Pulling Tools

S Pulling Tools

ACT S Pulling Tools are used to retrieve equipment with external fishing necks by Jar-Up action. These tools are also used to run and release equipment by jarring down. Available in 3 different types:

1. SB : w/Longest Core
2. SS : w/ Short Core
3. SM : w/ Medium Core

Either of above tools can be changed to other types by changing core. All other parts of above tools are interchangeable.

Engineering Data for 'S' Pulling Tools
NOMINAL (IN.)	TYPE	O.D. (IN.)	FINISHING NECK (IN.)	PULLS NECK O.D. (IN.)	TOP THREAD	REACH (IN.)	ASSEMBLY NO.
1-1/4	SB	1.220	1.000	1.000	5/8 - 11	1.280	127SB14
1-2/3	SM	1.188	0.875	0.875	15/16 - 10	1.680	127SM7
1-3/16	SM	1.190	1.188	0.875	15/16 - 10	1.680	127SM7
1-1/2	SB	1.437	1.188	1.188	15/16 - 10	0.688	127SB3
1-1/2	SB	1.437	1.188	1.188	15/16 - 10	1.297	127SB6
1-1/2	SS	1.437	1.188	1.188	15/16 - 10	1.780	127SS3
1-1/2	SM	1.380	1.375	0.875	15/16 - 10	1.578	127SM3
2	SB	1.766	1.375	1.375	15/16 - 10	1.219	127SB1
2	SM	1.766	1.375	1.375	15/16 - 10	1.640	127SM1
2	SS	1.766	1.375	1.375	15/16 - 10	2.030	127SS1
2-1/2	SB	2.188	1.375	1.75	15/16 - 10	1.281	127SB2
2-1/2	SS	2.188	1.375	1.75	15/16 - 10	2.000	127SS2
3	SB	2.734	2.312	2.312	1-1/16 - 10	1.380	127SB9
3	SB	2.844	2.312	2.312	1-1/16 - 10	1.500	127SB7
3	SS	2.844	2.312	2.312	1-1/16 - 10	2.210	127SS4
3-1/2	SB	3.115	2.312	2.75	1-1/16 - 10	1.690	127SB11
4	SB	3.670	2.312	2.75	1-1/16 - 10	1.500	127SB10