'R' Pulling Tools

	'R' Pulling Tools

R Pulling Tools

ACT R Pulling Tools are used to engage External Fishing Necks and to be released by Jar-Up action. These tools are available in 3 different types:

1. RB : w/Longest Core
2. RS : w/ Medium Core
3. RJ : w/ Short Core

Either of above tools can be changed to other types by changing core. All other parts of above tools are interchangeable.

Engineering Data for 'R' Pulling Tools
NOMINAL (IN.)	TYPE	O.D. (IN.)	FINISHING NECK (IN.)	PULLS NECK O.D. (IN.)	TOP THREAD	REACH (IN.)	ASSEMBLY NO.
1-1/4	RB	1.220	1.000	1.000	5/8 - 11	1.219	127RB10
1-1/4	RS	1.220	1.000	1.000	5/8 - 11	2.125	127RS10
1-1/4	RJ	1.220	1.000	1.000	5/8 - 11	1.844	127RJ4
1-1/2	RB	1.430	1.188	1.188	15/16 - 10	1.265	127RB14
1-1/2	RS	1.430	1.188	1.188	15/16 - 10	1.797	127RS5
1-1/2	RJ	1.430	1.188	1.188	15/16 - 10	.547	127RJ5
1-1/2	RB	1.484	1.188	1.188	15/16 - 10	1.050	127RB21
1-3/4	RS	1.562	1.188	1.188	15/16 - 10	1.797	127RS14
1-3/4	RJ	1.560	1.188	1.188	15/16 - 10	2.550	127RJ10
2	RB	1.770	1.375	1.375	15/16 - 10	1.219	127RB17
2	RS	1.770	1.375	1.375	15/16 - 10	1.984	127RS6
2	RJ	1.770	1.375	1.375	15/16 - 10	2.547	127RJ1
2-1/2	RB	2.180	1.375	1.750	15/16 - 10	1.203	127RB18
2-1/2	RS	2.180	1.375	1.750	15/16 - 10	1.984	127RS7
2-1/2	RJ	2.180	1.375	1.750	15/16 - 10	2.547	127RJ2
3	RB	2.74	2.312	2.312	1-1/16 - 10	1.297	127RB19
3	RS2	74	2.312	2.312	1-1/16 - 10	2.190	127RS8
3	RJ	2.74	2.312	2.312	1-1/16 - 10	2.609	127RJ3
3-1/2	RB	3.110	2.312	2.75	1-1/16 - 10	1.350	127RB30
3-1/2	RS	3.110	2.312	2.75	1-1/16 - 10	2.100	127RS16
4	RB	3.670	2.312	3.125	1-1/16 - 10	1.49	127RB20
4	RS	3.718	2.312	3.125	1-1/16 - 10	2.156	127RS9
4	RJ	3.660	2.312	3.125	1-1/16 - 10	2.000	127RJ6