|
Pulling Tools (JD & JU Series) |
|
 |
Pulling Tools (JD & JU Series)
ACT JU (Jar Up) Pulling Tools are used to shear and release tools and are available with C - S
Core options.
JD (Jar Down) Pulling Tools are also used to shear and release tools and are available with
C - S - L Core options.
The cores of JU & JD are same.
JU & JD Pulling Tools are used to engage External Fishing Necks.
| Engineering Data for JD & JU Series Pulling Tools |
NORMAL
SIZE |
TYPE |
MAX.
O.D. (IN.) |
PULLS NECK
O.D. (IN.) |
REACH
(IN.)* |
CONN THREAD
(PIN) |
PRONG CONN
THREAD
(BOX) |
FISHING NECK
O.D. (IN.)* |
ASSEMBLY NO. |
| 1-1/4 |
JDC |
1.291 |
0.875 |
1.937 |
15/16 - 10 |
1/4 - 20 |
1.187 |
70151 |
| 1-1/4 |
JDS |
1.291 |
0.875 |
2.687 |
15/16 - 10 |
N/A |
1.187 |
70165 |
| 1-1/4 |
JUC |
1.250 |
0.875 |
1.937 |
15/16 - 10 |
1/4 - 20 |
1.187 |
71175 |
| 1-3/8 |
JDC |
1.375 |
1.000 |
1.875 |
15/16 - 10 |
N/A |
1.187 |
70153 |
| 1-1/2 |
JDC |
1.422 |
1.187 |
1.093 |
15/16 - 10 |
1/2 - 13 |
1.187 |
70154 |
| 1-1/2 |
JDS |
1.422 |
1.187 |
1.843 |
15/16 - 10 |
1/2 - 13 |
1.187 |
70166 |
| 1-1/2 |
JUC |
1.422 |
1.187 |
1.093 |
15/16 - 10 |
1/2 - 13 |
1.187 |
71174 |
| 1-1/2 |
JUS |
1.422 |
1.187 |
1.843 |
15/16 - 10 |
1/2 - 13 |
1.187 |
71194 |
| 1-5/8 |
JDS |
1.625 |
1.187 |
1.843 |
15/16 - 10 |
1/2 - 13 |
1.187 |
70155 |
| 2 |
JDC |
1.859 |
1.375 |
1.437 |
15/16 - 10 |
1/2 - 13 |
1.375 |
70156 |
| 2 |
JDS |
1.859 |
1.375 |
2.250 |
15/16 - 10 |
1/2 - 13 |
1.375 |
70168 |
| 2 |
JDL |
1.859 |
1.375 |
2.812 |
15/16 - 10 |
1/2 - 13 |
1.375 |
70164 |
| 2 |
JUC |
1.859 |
1.375 |
1.437 |
15/16 - 10 |
1/2 - 13 |
1.375 |
71176 |
| 2 |
JUS |
1.859 |
1.375 |
2.125 |
15/16 - 10 |
1/2 - 13 |
1.375 |
7 1196 |
| 2-1/2 |
JDC |
2.250 |
1.750 |
1.312 |
15/16 - 10 |
1/2 - 13 |
1.375 |
70158 |
| 2-1/2 |
JDS |
2.250 |
1.750 |
2.187 |
15/16 - 10 |
1/2 - 13 |
1.375 |
70170 |
| 2-1/2 |
JUC |
2.250 |
1.750 |
1.312 |
15/16 - 10 |
1/2 - 13 |
1.375 |
71178 |
| 2-1/2 |
JUS |
2.250 |
1.750 |
2.187 |
15/16 - 10 |
1/2 - 13 |
1.375 |
71198 |
| 3 |
JDC |
2.796 |
2.312 |
1.437 |
15/16 - 10 |
1/2 - 13
and
5/8 - 11 |
1.750 |
70160 |
| 3 |
JDC |
2.796 |
2.312 |
0.687 |
15/16 - 10 |
5/8 - 11 |
1.750 |
70031 |
| 3 |
JDS |
2.812 |
2.312 |
2.125 |
15/16 - 10 |
5/8 - 11 |
1.750 |
70172 |
| 3 |
JDL |
2.812 |
2.312 |
2.609 |
15/16 - 10 |
5/8 - 11 |
1.750 |
70173 |
| 3 |
JUC |
2.812 |
2.312 |
1.437 |
15/16 - 10 |
5/8 - 11 |
1.750 |
71180 |
| 3 |
JUS |
2.812 |
2.312 |
2.125 |
15/16 - 10 |
5/8 - 11 |
1.750 |
71200 |
| 4 |
JDC |
3.750 |
3.125 |
2.312 |
1-1/16 - 10 |
1-1/4 - 12 |
2.312 |
70162 |
| 4 |
JUC |
3.750 |
3.125 |
3.375 |
1-1/16 - 10 |
1-1/4 - 12 |
2.312 |
71182 |
*Reach is the distance from the core to the engaging shoulder of the dogs.
Other core length / OD's available on request.
|
|
