PTHD Tubing Head Spools are designed for the
popular split hanger suspensions for dual
completions. It has welded wedges for hanger
alignment and an open - face top flange.|
Type 'PTHD' Tubing Spool accepts either the
'PTHDE', 'PTHSCL', 'PTHDCL' tubing hangers. This
tubing spool is provided with a wedge to position the
hanger. The standard outlets are 2 1/16 2000-10000
PSI WP studded. The outlets are threaded for the
valve removal plug to allow for the removal of the
valve. The bottom of the flange is designed for
installing the type PBP-1 Bottom pack off (PP Seal for
high pressure over 5000 PSI WP) and is provided
with a plastic packing injection port and a test port.
The top of the spool is provided with hold down
screws to secure the tubing hanger.
NOTE: All sizes are in inches.