Tubing Head - American Completion Tools

	Tubing Head

American Completion Tools Tubing Head Spools (PTHS) body have a straight bore with a 45 deg landing shoulder. While the top flange has hold down screws as standard equipment for securing tubing hanger, the bottom flange is designed for installation of American Completion Tools bottom pack - off PBP-1 & PBP - 2 (PPseal for high pressure over 5000 PSI) and is provided with bit guide, a plastic packing injection port with bleeder outlet and a test port. This can accept Tubing Hangers Mandrel Type 'PTHSM', Wrap around type 'PTHSW' and Extended neck type 'PTHSE'.

Standard outlets are 2-1/16" 2000 -10000 PSI WP studded. Even 2" Line Pipe & Flanged outlets can also be provided. Studded outlets are threaded internally for the valve removal plugs. Top flange is provided with hold down screws to secure tubing hanger.

Tubing Head Spool (PTHS) Dimension
Flange Sizes		Overall Height (H)	Height Of Side Outlets (h)	Minimum Bore (øA)	Top Flange Bore (øB)
Bottom	Top	Overall Height (H)	Height Of Side Outlets (h)	Minimum Bore (øA)	Top Flange Bore (øB)
9 X 2000	7 1/16 X 2000	16	7 15/16 6 1/2	7 1/32
9 X 2000	7 1/16 X 3000	16	7 15/16 6 1/2	7 1/32
9 X 2000	7 1/16 X 3000	16	7-15/16 6-13/16		7 1/32
9 X 3000	7 1/16 X 5000	16	8 1/16 6 13/16		7 1/32
11 X 2000	7 1/16 X 2000	16	8 1/16 6 13/16		7 1/32
11 X 2000	7 1/16 X 3000	16	8 1/16 6 13/16		7 1/32
11 X 3000	7 1/16 X 3000	19 1/2	10 1/2 6 13/16		7 1/32
11 X 3000	7 1/16 X 5000	22 7/8	12 3/8 6 13/16		7 1/32
11 X 5000	7 1/16 X 5000	23 1/2	10 3/4 6 13/16		7 1/32
11 X 2000	9 X 2000	16	8 1/16 8 1/16	8 3/4
11 X 2000	9 X 3000	16	8 1/16 8 1/16	8 3/4
11 X 3000	9 X 3000	19 1/2	10 1/2 8 1/16	8 3/4
11 X 3000	9 X 5000	22 7/8	12 3/8 8 1/16	8 3/4
11 X 5000	9 X 5000	25	12 3/4 8 1/16	8 3/4
11 X 5000	7 1/16 X 10000	25	12 3/4 6 9/16	7 1/32
11 X 5000	9 X 10000	25	12 3/4 8 1/16	8 3/4
11 X 10000	7 1/16 X 10000	26 3/8	12 3/4 6 3/8	7 1/32
11 X 10000	7 1/16 X 15000	27 3/8	12 3/4 6 3/8	7 1/32

NOTE: All sizes are in inches.