|
External Sleeve Control Choke |
|
| Size & WP |
Max
Orifice Dia |
| 2.1/16 x 2000 |
25.4 mm |
| 2.9/16 x 2000 |
50.8 mm |
| 3.1/8 x 2000 |
50.8 mm |
| 4.1/16 x 2000 |
76.2 mm |
| 2.1/16 x 3000 |
25.4 mm |
| 2.9/16 x 3000 |
50.8 mm |
| 3.1/8 x 3000 |
50.8 mm |
| 4.1/16 x 3000 |
76.2 mm |
| 2.1/16 x 5000 |
25.4 mm |
| 2.9/16 x 5000 |
50.8 mm |
| 3.1/8 x 5000 |
50.8 mm |
| 4.1/16 x 5000 |
76.2 mm |
| 2.1/16 x 10000 |
25.4 mm |
| 2.9/16 x 10000 |
50.8 mm |
| 3.1/16 x 10000 |
50.8 mm |
| 2.1/16 x 15000 |
25.4 mm |
| 3.1/16 x 15000 |
50.8 mm |
|
American Completion Tools External sleeve control choke, (Model-
ES)
The External sleeve control chokes minimize
erosion and improve flow characteristics suitably for
erosive service and under high pressure drop, with sand
concentration. It applies the principle of "flow
Impingement" to dissipate and contain the destructive
forces of cavitation, within the heavy duty thick walled
cage of tungsten carbide.
Other features:
 Spring loaded pressure energized stem seal.
Field proven metal bonnet seal.
Dependable positive shut-off.
| Part List |
| Item |
Description |
Quantity |
| 1 |
HEX NUT |
1 |
| 2 |
WASHER |
1 |
| 3 |
HANDWHEEL |
1 |
| 4 |
HEX, SOC. SET SCREW |
1 |
| 5 |
INDICATOR |
1 |
| 6 |
STUD |
8 |
| 7 |
NUT |
8 |
| 8 |
BONNET |
1 |
| 9 |
NYLON BALL |
1 |
| 10 |
THUMB SCREW |
1 |
| 11 |
RING-BONNET |
1 |
| 12 |
JUNK RING |
2 |
| 13 |
SEAL |
1 |
| 14 |
BACK - UP RING - SEAL |
1 |
| 15 |
INT. RETAINER RING |
1 |
| 16 |
RETAINER RING - COIL TYPE |
1 |
| 17 |
STEM |
1 |
| 18 |
RING (2 HALVES) - STEM |
1 |
| 19 |
INT. RETAINER RING |
1 |
| 20 |
'O' RING |
1 |
| 21 |
BACK-UP RING (SCARF CUT) |
1 |
| 22 |
SEAT |
1 |
| 23 |
SEAT SEAL |
1 |
| 24 |
BODY |
1 |
| 25 |
FLOW RING |
1 |
| 26 |
BODY VENT FITTING |
1 |
| 27 |
GREASE NIPPLE |
1 |
| 28 |
RIVET TAG (NOT SHOWN) |
4 |
| 29 |
NAME PLATE (NOT SHOWN) |
1 |
| 30 |
FLANGE PROTECTOR (NOT SHOWN) |
2 |
|
|
