 |
Mud Gun |
 | |
|
American Completion Tools' mud mixing guns are simple in design. All turning takes place on double rows of steel balls in flame hardened
races. There is nothing to tighten or adjust. Flow is unrestricted and pressure drop is minimum. ACT mud mixing
guns are of 3 types: 1. Spinner/ Pivot Type 2. Non Spin Type 3. Bottom Type.  The spinner/pivot type mud gun is designed for use in tanks where the utmost in constant agitation is desired. The nozzles are set at an angle and the pressure in the line imparts a spinning motion which is accommodated by a style 20 high pressure swivel joints. Furnished in any desired length as specified in order. Size: 2", 3", 4". Pressure: Up to 5000 PSI Non Spin Type The non spin type mud gun is designed for mixing large volume of muds in the top of the tank or pit and also for transferring mud from one tank to another tank. Non spin mud gun cannot spin because centrifugal force is neutralized by the offset of the barrel of the gun. Perforated flanges and locking pins pemit locking of gun in any position. Size: 2", 3", 4". Pressure: Up to 5000 PSI Bottom Type The bottom type mud gun is designed for use where large size metal tanks are employed as mud pits. It is simple in construction, easy to install and easy to operate. Size: 2", 3", 4". Pressure: Up to 5000 PSI NOTE: 1. Discharge nozzles in all mud guns are equipped with tungsten carbide insert. 2. Other sizes & pressure ratings are also available on request. |
| 3084 South I-35W | Burleson, Texas 76028 | Phone (817) 790-6608 | Fax (817) 783-8081 | www.americancompletiontools.com | sales@americancompletiontools.com |
| © American Completion Tools, Inc. - All Rights Reserved | |||||