Safety Valve Landing Nipples
Separation Sleeves

Home   Oils Tools Catalog   Coil Tubing Equipment Oils Tools Catalog  Tool Shop  Contact American Completion Tools  Oils Tools Catalog 

Safety Valve Landing Nipples

Safety Valve Landing Nipples

Safety Valve Landing Nipples are used to accommodate ACT wireline retrievable sub surface safety valves. These nipples have a locking recess and a hydraulic communication port located between the two polished bores. This nipple features an integral control line connection port which operates Sub Surface Safety Valve.

FLAPPER-TYPE WIRELINE-RETRIEVABLE SAFETY VALVES

Tubing Size Landing Nipple Seal Bore * Working Pressure
in. mm. in. mm. psi
2 3/8 60.33 1.710 43.43 5,000
6,000
7,500
10,000
1.875 47.63
2 7/8 73.032.12553.98
2.18855.58
2.31358.75
3 1/2 88.902.56265.07
2.75069.85
2.81371.45
4101.603.31384.15
4 1/2 114.303.43787.30
3.68893.68
3.81396.85
5127.004.125104.78
5 1/2139.704.562115.87
7 177.805.750146.05
5.875149.23
5.963151.46

* Please check with factory for the metallurgy & pressure rating

Separation Sleeve

Separation Sleeve

ACT Separation Sleeve, when attached to an appropriate lock is a wireline Retrievable Tool, used to isolate the control line port of Safety Valve Landing Nipples.

Service & Completion Tool Products
3084 South Interstate 35 W, Burleson, Texas 76028
Office: (817) 790-6608 - Fax: (817) 783-8081
sales@americancompletiontools.com		 © American Completion Tools, Inc.
www.americancompletiontools.com
All Rights Reserved		 Flow Line Products
9223 Solon Rd., Houston, Texas 77064
Office: (281) 894-5213 - Fax: (281) 894-5217
sales2@americancompletiontools.com