ACT Model A Lite Bridge Plug
Wireline Set / Drillable

Home   Oils Tools Catalog   Service and Completion Oil Tools  Tool Shop  Contact American Completion Tools  Oils Tools Catalog 

Features
  • Drillable cast iron construction
  • Uses Alpha Big Boy Setting Sleeves and Adapter Rods
  • Wireline set on GO or Baker Wireline Pressure Setting Tool
  • Hydraulic set on ACT Hydraulic Setting Tool
  • Small OD's for extra clearance in heavy viscous fluids
  • One-piece slips set in premium grade casings including P-110
  • Multi-Durometer packing system
  • Plug remains set until gas pressure equalizes during drill out
  • For temporary or permanent service
The ACT Model A Lite Bridge Plug is a medium pressure plug constructed of drillable cast-iron that uses Alpha Big Boy setting sleeves and adapter rods. It can be set on any GO or Baker type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal. One-piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. It is also good in horizontal applications because there are no back-up rings. Optional packing systems of Viton or Aflas are available on special order. Special application tools can be custom designed to fit your specific needs. 		ACT Model A Lite Bridge Plug

Specification Guide
Casing ACT Model A Lite Bridge Plug Setting Range Model BB Wireline Setting Equipment Rating
OD WT Part Number OD Min Max Setting Sleeve
Baker		 Setting Sleeve
GO		 Adapter Rod
GO		 PSI Temp
2-3/8 4.0-5.9 010-1710-003 Baker
010-1710-005 GO		 1.750 1.867 2.041 010-1710-200
Baker No.05		 010-1710-100
GO 1-11/16		 Not Reqd 7,500 250
Deg F
2-7/8 6.4-6.5 010-2100-003 Baker
010-2100-005 GO		 2.187 2.441 2.517 010-2100-200
Baker No.05		 010-2100-100
GO 1-11/16		 Not Reqd
3-1/2 12.7-12.95 010-2500-003 Baker
010-2500-005 GO		 2.500 2.640 2.750 010-2500-200
Baker No.05		 010-2500-100
GO 1-11/16		 Not Reqd
3-1/2 5.7-10.2 010-2750-003 Baker
010-2750-005 GO		 2.750 2.867 3.258 010-2750-200
Baker N0.05		 010-2750-100
GO 1-11/16		 Not Reqd
4 5.6-14 010-3120-003 Baker
010-3120-005 GO		 3.125 3.340 3.732 010-3120-200
Baker No.10		 010-3120-100
GO 2-1/8		 Not Reqd
4-1/2 9.5-16.6 010-3593-003 Baker
010-3593-005 GO		 3.593 3.826 4.090 010-3593-200
Baker No.10		 010-3593-100
GO 3-1/2		 010-3593-106
5 11.5-18 010-3937-003 Baker
010-3937-005 GO		 3.937 4.154 4.560 010-3937-200
Baker No.20		 010-3937-100
GO 3-1/2
5-1/2 13-25 010-4312-003 Baker
010-4312-005 GO		 4.312 4.580 5.044 010-4312-200
Baker No.20		 010-4312-100
GO 3-1/2
6 10.5-12 010-5375-003 Baker
010-5375-005 GO		 5.375 5.595 6.135 010-5687-200
Baker No.20		 010-5687-100
GO 3-1/2		 010-5687-106
6-5/8 17-34
7 32-38
7 17-35 010-5687-003 Baker
010-5687-005 GO		 5.687 6.004 6.538

Service & Completion Tool Products
3084 South Interstate 35 W, Burleson, Texas 76028
Office: (817) 790-6608 - Fax: (817) 783-8081
sales@americancompletiontools.com		 © American Completion Tools, Inc.
www.americancompletiontools.com
All Rights Reserved		 Flow Line Products
9223 Solon Rd., Houston, Texas 77064
Office: (281) 894-5213 - Fax: (281) 894-5217
sales2@americancompletiontools.com