ACT American Completion Tools

 Model Premium & Lite HM Bridge Plug
Tubing Set
Specification Guide - Guidelines and Charts
Home   Oils Tools Catalog   Service and Completion Oil Tools  Tool Shop  Contact American Completion Tools  Oils Tools Catalog 

The Model HM Bridge Plug is set using hydraulic power to set the top slips and then mechanical pull to complete the set. The Premium is for high pressure and temperature while the Lite sustains moderate temperature and pressure.

The need for a mechanical setting tool does not exist because the setting mechanism is built-in. A ball is placed in the tubing string plugging off the built-in equalizing ports. Pressure is then applied to set the top slip and then mechanical pull is applied to finish the set. Releasing the tubing string from the plug is done by simply turning to the right.

Full tubing I.D. is available after releasing from the plug allowing other equipment to extend through the end of the tubing string.

Features:
Drillable
Cast iron construction
One piece slip
Sets in any grade casing including P-110
Metal back-up to prevent rubber extrusion
For temporary or permanent service
Ratcheting lock ring holds setting force
Excellent for deviated wells
 ACT Hydro Mechanical Bridge Plug

Specification Guide
Casing HM Bridge Plug Setting Tool
OD WT (lbs/ft) Premium Lite OD Min Max
4 1/2 9.5 - 16.6 010-3593-055 010-3593-065 3.593 3.826 4.090
5 11.5 - 18 010-3937-055 010-3937-065 3.937 3.920 4.560
5 1/2 13 - 25 010-4312-055 010-4312-065 4.312 4.580 5.047
5 3/4 22.5 - 25.2 010-4312-055 010-4312-065 4.312 4.580 5.047
6 14 - 26 010-4937-055 - 4.937 5.140 5.595
6 5/8 34 010-4937-055 - 4.937 5.140 5.595
6 10.5 - 12 010-5375-055 010-5375-065 5.375 5.595 6.366
6 5/8 17 - 34 010-5375-055 010-5375-065 5.375 5.595 6.366
7 23 - 40 010-5375-055 010-5375-065 5.375 5.595 6.366
6 5/8 17 - 22 010-5687-055 010-5687-065 5.687 5.989 6.655
7 17 - 35 010-5687-055 010-5687-065 5.687 5.989 6.655
7 5/8 20 - 39 010-6312-055 - 6.312 6.625 7.263
8 5/8 24 - 49 010-7125-055 - 7.125 7.511 8.248
9 5/8 29.3 - 61.1 010-8125-055 - 8.125 8.375 9.063
10 3/4 54 - 81 010-9000-055 - 9.000 9.250 9.784
10 3/4 32.7 - 51 010-9437-055 - 9.437 9.850 11.150
11 3/4 38 - 60 010-9437-055 - 9.437 9.850 11.150
13 3/8 77 - 102 010-1156-055 - 11.562 11.633 12.464
13 3/8 48 - 72 010-1200-055 - 12.000 12.347 12.715
16 65-109 010-1425-055 - 14.250 14.688 15.250
18-5/8 76-96.5 010-1725-055 - 17.250 17.655 18.730
20 133-169 010-1725-055 - 17.250 17.655 18.730

3084 South I-35W Burleson, Texas 76028 Phone (817) 790-6608 Fax (817) 783-8081 www.americancompletiontools.com sales@americancompletiontools.com
© American Completion Tools, Inc.  -  All Rights Reserved