FRAC Plugs Wireline Set - Standard Frac Plug

	FRAC Plugs Wireline Set Standard Frac Plug - Big Bore Frac Plug

The Standard Frac Plug provides an economical means of temporary zone isolation for fracturing or other treatments. The plug can be set on different types of wireline pressure setting tools.

The Standard Frac Plug is supplied with a shear ring to give an accurate and secure set. Also supplied is a ball that will seat on the top of Frac Plug during a fracturing operation. This plug sustains moderate pressures and temperatures.

Features:
Electric wireline set
Drillable
Cast iron construction
One piece slips - hardened to depth of wicker only
Sets in any grade casing including P-110
Bottom set with shear ring
For temporary or permanent service
Ratcheting lock ring holds setting force
Small O.D.'s for speed and safety when running

Specification Guide
Casing		Plug		Setting Range		Setting Tool
OD	WT (lbs/ft)	Part Number	OD	Min	Max	Baker	GO
4-1/2	9.5-16.6	020-3593-000	3.593	3.826	4.090	10	3-1/2
4-1/2	9.5-13.5	020-3937-000	3.937	3.920	4.560	10	3-1/2
5	11.5-21	020-3937-000	3.937	3.920	4.560	10	3-1/2
5-1/2	13-25	020-4312-000	4.312	4.580	5.047	20	3-1/2
5-3/4	22.5-25.2	020-4312-000	4.312	4.580	5.047	20	3-1/2
6-5/8	17-22	020-5687-000	5.687	5.989	6.655	20	3-1/2
7	17-35	020-5687-000	5.687	5.989	6.655	20	3-1/2