 |
Model BKR Premium Bridge Plug
|
 | |
Features
The Model BKR Premium Bridge Plug is a high pressure plug constructed of drillable cast-iron that uses ACT, Alpha, Bolt, Elder or Baker K-1 type setting sleeves, no tension mandrel is required. It can be set on any Baker type wireline pressure setting tool or pipe/ coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. The packing elements are contained by rocker action back-up rings that eliminate extrusion of the elements at high temperatures and pressures. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal. One-piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. Optional packing systems of Viton or Aflas are available on special order. This plug will not vent gas pressure prior to plug moving unless provisions are made. Special application tools can be custom designed to fit your specific needs. |
| Specification Guide | ||||||||||
| Casing | Model BKR Premium Bridge Plug | Setting Range | Model BKR Wireline Setting Sleeve | Rating | ||||||
| OD | WT | Part Number | OD | Min | Max | Sleeve Part Number | Baker No. | PSI | Temp | |
| 4-1/2 | 9.5-16.6 | 010-3593-000 | 3.593 | 3.826 | 4.090 | 050-3593-200 | 10 | 10,000 | 325 Deg F | |
| 5 | 11.5-18 | 010-3937-000 | 3.937 | 4.154 | 4.560 | 050-3937-200 | 20 | |||
| 5-1/2 | 13-25 | 010-4312-000 | 4.312 | 4.580 | 5.044 | 050-4312-200 | 20 | |||
| 6 | 10.5-12 | 010-5375-000 | 5.375 | 5.595 | 6.135 | 050-5687-200 | 20 | |||
| 6-5/8 | 17-34 | |||||||||
| 7 | 32-38 | |||||||||
| 7 | 17-35 | 010-5687-000 | 5.687 | 6.004 | 6.538 | |||||
| 7-5/8 | 20-39 | 010-6312-000 | 6.312 | 6.625 | 7.263 | 050-6312-200 | 20 | |||
| 8-5/8 | 24-49 | 010-7125-000 | 7.125 | 7.511 | 8.248 | 050-7125-200 | 20 | 8,000 | 300 Deg F | |
| 9-5/8 | 29.3-53.5 | 010-8125-000 | 8.125 | 8.435 | 9.063 | 050-8125-200 | 20 | |||
| 10-3/4 | 60.7-81 | 010-9000-000 | 9.000 | 9.250 | 9.660 | 050-9000-200 | 20 | 5,000 | ||
| 10-3/4 | 32.75-60.7 | 010-9437-000 | 9.437 | 9.660 | 10.192 | 050-9437-200 | 20 | |||
| 13-3/8 | 77-102 | 010-1156-000 | 11.562 | 11.633 | 12.464 | 050-1156-200 | 20 | 3,000 | ||
| 13-3/8 | 48-72 | 010-1200-000 | 12.000 | 12.175 | 12.715 | 050-1200-200 | 20 | |||
| Service & Completion Tool Products 3084 South Interstate 35 W, Burleson, Texas 76028 Office: (817) 790-6608 - Fax: (817) 783-8081 sales@americancompletiontools.com |
© American Completion Tools, Inc. www.americancompletiontools.com All Rights Reserved |
Flow Line Products 9223 Solon Rd., Houston, Texas 77064 Office: (281) 894-5213 - Fax: (281) 894-5217 sales2@americancompletiontools.com |