Model BKR Lite Bridge Plug
Wireline Set / Drillable

Home   Oils Tools Catalog   Oils Tools Catalog  Tool Shop  Contact American Completion Tools  Oils Tools Catalog 

Features
  • Drillable cast iron construction
  • Uses Bolt, Elder or Baker K-1 Setting Sleeves
  • Wireline set on Baker Type Wireline Pressure Setting Tool
  • Hydraulic set on ACT Hydraulic Setting Tool
  • Small OD's for extra clearance in heavy viscous fluids
  • One-piece slips set in premium grade casings including P-110
  • Multi-Durometer packing system
  • For temporary or permanent service
The ACT Model BKR Lite Bridge Plug is a medium pressure plug constructed of drillable cast-iron that uses Bolt, Elder or Baker K-1 type setting sleeves, no tension mandrel is required. It can be set on any Baker type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal. One-piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. It is also good in horizontal applications because there are no back-up rings. Optional packing systems of Viton or Aflas are available on special order. This plug will not vent gas pressure prior to plug moving unless provisions are made. Special application tools can be custom designed to fit your specific needs. 		ACT Model BKR Lite Bridge Plug

Specification Guide
Casing Model BKR Lite Bridge Plug Setting Range Model BKR Wireline Setting Sleeve Rating
OD WT Part Number OD Min Max Sleeve Part Number Baker No. PSI Temp
4-1/2 9.5-16.6 010-3593-001 3.593 3.826 4.090 050-3593-200 10 7,500 250
Deg F
5 11.5-18 010-3937-001 3.937 4.154 4.560 050-3937-200 20
5-1/2 13-25 010-4312-001 4.312 4.580 5.044 050-4312-200 20
6 10.5-12 010-5375-001 5.375 5.595 6.135 050-5687-200 20
6-5/8 17-34
7 32-38
7 17-35 010-5687-001 5.687 6.004 6.538


Service & Completion Tool Products
3084 South Interstate 35 W, Burleson, Texas 76028
Office: (817) 790-6608 - Fax: (817) 783-8081
sales@americancompletiontools.com		 © American Completion Tools, Inc.
www.americancompletiontools.com
All Rights Reserved		 Flow Line Products
9223 Solon Rd., Houston, Texas 77064
Office: (281) 894-5213 - Fax: (281) 894-5217
sales2@americancompletiontools.com