Surface Flow Controls Motor Valves - FCV Series

	Surface Flow Controls Motor Valves FCV Series

ACT FCV Series Flow Control Valves are manually adjusted valves designed to provide repeatable settings. Available in 1 and 2-inch body sizes and a wide range of bodies and trim configurations, these valves feature an adjustable handwheel calibrated in sixty-fourths of an inch, and Teflon packing for positive seal and minimum maintenance. Threaded connections are rated for 5000 psi, socket weld at 3600 psi and butt weld at 5000 psi. They are designed to operate in any position and to resist the effects of vibration on the selected setting. Their construction allows easy inspection or replacement of internals without removing the valve from the line. Type 316, 410 or duplex - stainless steel bodies, and stainless steel handles and indicator rings are available for corrosive service.

Valve trims and seats are available in 1/8, 1/4, 1/2 or 3/4-inch sizes in stainless steel, hard chrome or tungsten carbide materials.

ACT FCVT High Temperature Flow Control Valves are designed for steam injection or other high temperature gas or liquid service. Rated at 3500 psi working pressure at 7000F, these 2 inch angle body valves feature 1/4, 1/2 or 3/4 inch stainless steel, hard chrome or tungsten carbide long throat trim and high temperature packing. The high temperature configuration is also available in an adjustable choke valve model (ACVT -5). This valve series is also available with flanged end connections.

Surface Flow Controls Motor ValvesFCV Series

Surface Flow Controls Motor Valves
FCV Series