PR-5 Retrievable Production - Pressure Operated Gas Lift Valves

	Retrievable Production - Pressure Operated Gas Lift Valves PR-5

DESCRIPTION
ACT wireline retrievable production pressure operated GLV' s are used for continuous flow gas lift production. A nitrogen charged multiply monel bellow provides the force necessary to maintain valve in a normally closed position.T his valve contain integral reverse flow check valve.
Port sizes available are 3/16", 1/4" & 5/16"

OPERATION
Production fluid enters the valve and acts on the effective bellow area. The production pressure necessary to compress the bellow is controlled by precharged nitrogen pressure. When production pressure overcomes the precharged nitrogen pressure in the bellow, the bellow is compressed and lifts the stem tip off the seat. Injection gas flows through the seat, past the reverse flow check valve and into the production conduit.

Engineering Data for Retrievable Production - Pressure Operated Gas Lift Valves PR-5
Type	Assy No.	Nominal O.D. (Inch)	Latch	Running Tool		Pulling Tool		Mandrel Series
				Type	Assy No	Type	Assy No
PR 5	160-40XX-XXX-01	1-1/2	R, RA, RK	RTG, TER	16927 11730	PTG, TRP	17048 11390	MM, MMA, MMG

Retrievable Production - Pressure Operated Gas Lift Valves

Retrievable Production - PressureOperated Gas Lift Valves PR-5

Retrievable Production - Pressure
Operated Gas Lift Valves PR-5