PDK-1 Wireline Retrievable Dummy Valve - American Completion Tools

	PDK-1 Wireline Retrievable Dummy Valve

FUNCTION
The Wireline Retrievable Dummy Valves (PDK -1) have 2 sets of packing which fit in the seal bore of side pocket mandrel and isolate the casing ports between tubing and casing annulus. In other words the valves are used to prevent communication between the tubing and the casing.

APPLICATION
These Valves are used in side pocket mandrel to provide a positive seal between casing - tubing annulus and to protect the mandrel seal bore until they are retrieved by standard wireline methods. When installed, the PDK-1 Dummy Valves eliminates unintentional placement of the other tools or debris in the mandrel pocket.

Engineering Data for PDK-1 Wireline Retrievable Dummy Valve
Type	Assy. No.	Nominal OD (inch)	Packing OD (inch)		Latch Or End Conn.	Running Tool Type	Pulling Tool Type	Mandrel Type
			Upper	Lower
PDK - 1	170-09	1	1-1/32	1-1/32	Integral Bottom	GA - 2	MP	TMP

3084 South I-35W	Burleson, Texas 76028	Phone (817) 790-6608	Fax (817) 783-8081	www.americancompletiontools.com	sales@americancompletiontools.com
© American Completion Tools, Inc. - All Rights Reserved