Threaded Fittings, Plugs and Bushings

Home   Oils Tools Catalog   Flanges, Studs & Nuts, Ring Gaskets, Pipe Fittings & Pipes   Tool Shop  Contact American Completion Tools  Oils Tools Catalog 

Threaded Fittings, Plugs and Bushings

4 THREADED FITTINGS (AS PER ANSI/ASME B16.11)        *All dimensions are in inches
NOM. PIPE SIZE :- 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
W
(END TO END) COUPLING		 3000
6000		 1.25 1.38 1.50 1.88 2.00 2.38 2.62 3.12 3.38 3.62 4.25 4.75
P
(END TO END) CAPS		 3000
6000		 0.75

 1.00
1.06		 1.00
1.06		 1.25
1.31		 1.44
1.50		 1.62
1.69		 1.75
1.81		 1.75
1.88		 1.88
2.00		 2.38
2.50		 2.56
2.69		 2.69
2.94
D
(OUTSIDE DIAMETER)		 3000
6000		 0.62
0.88		 0.75
1.00		 0.88
1.25		 1.12
1.50 		1.38
1.75		 1.75
2.25 		2.25
2.50		 2.50
3.00		 3.00
3.62		 3.62
4.25 		4.25
5.00		 5.50
6.25
G (MIN.)
(END WALL THICKNESS)		 3000
6000		 0.19
 0.19
0.25		 0.19
0.25 		0.25
0.31		 0.25
0.31 		0.38
0.44 		0.38
0.44		 0.44
0.50 		0.50
0.62 		0.62
0.75 		0.75
0.88		 0.88
1.12
B (MINIMUM LENGTH
OF PERFECT THREAD)		 0.25 0.32 0.36 0.43 0.50 0.58 0.67 0.70 0.75 0.93 1.02 1.09
L2 (EFFECTIVE LENGTH
OF EXTERNAL THREAD)		 0.264 0.402 0.408 0.534 0.546 0.683 0.707 0.724 0.757 1.138 1.20 1.30


5 PLUGS AND BUSHINGS (AS PER ANSI/ASME B16.11)        *All dimensions are in inches
NOM. PIPE SIZE :- 1/8 1/4 3/8 1/2 3/4 1 1 1/4 1 1/2 2 2 1/2 3 4
  A (LENGTH MINIMUM) 0.38 0.44 0.50 0.56 0.62 0.75 0.81 0.81 0.88 1.06 1.12 1.25
PLUGS (SQUARE HEAD) B (HEIGHT OF SQ.)(MIN) 0.25 0.25 0.31 0.38 0.44 0.50 0.56 0.62 0.69 0.75 0.81 1.00
C (WIDTH FLATS)(MIN) 0.28 0.38 0.44 0.56 0.62 0.81 0.94 1.12 1.31 1.50 1.69 2.50
PLUGS (ROUND HEAD) E (NOMINAL DIA OF HEAD) 0.41 0.53 0.69 0.84 1.06 1.31 1.69 1.91 2.38 2.88 3.50 4.50
D (LENGTH MIN.) 1.38 1.62 1.62 1.75 1.75 2.00 2.00 2.00 2.50 2.75 2.75 3.00
HEX PLUGS & BUSHINGS F (WIDTH FLATS, NOT SHOWN) 0.44 0.62 0.69 0.88 1.06 1.38 1.75 2.00 2.50 3.00 3.50 4.62
G (BUSHING)   0.12 0.16 0.19 0.22 0.25 0.28 0.31 0.34 0.38 0.41 0.50
H (PLUG) 0.25 0.25 0.31 0.31 0.38 0.38 0.56 0.62 0.69 0.75 0.81 1.00

NOTE:
ACT also manufactures and supplies the following.
A. Steel Pipe Fittings inclusive of Tees and Even Curvature bends to BS-534 for Butt Welding.
B. Screwed and Socket Welded Fitting such as Elbow, Cross, Tees, Coupling, Pipe Plugs, Bushing, Nipples etc., as per BS-3799.

Service & Completion Tool Products
3084 South Interstate 35 W, Burleson, Texas 76028
Office: (817) 790-6608 - Fax: (817) 783-8081
sales@americancompletiontools.com		 © American Completion Tools, Inc.
www.americancompletiontools.com
All Rights Reserved		 Flow Line Products
9223 Solon Rd., Houston, Texas 77064
Office: (281) 894-5213 - Fax: (281) 894-5217
sales2@americancompletiontools.com