Butt Welded Fittings Caps - American Completion Tools

	Butt Welded Fittings Caps

General Notes:
The shape of these Caps shall be ellipsoidal and shall conform to the shape requirements as given in the ASME Boiler & Pressure Vessel Code.

Notes:
a. Length E applies for thickness not exceeding that given in column "Limiting Wall Thickness for Length E"
b. Length E1 applies for thickness greater than that given in column "Limiting Wall Thickness" for NPS 24 and smaller. For NPS 26 and larger, length E1 shall be by agreement between manufacturer and purchaser.

NOMINAL PIPE SIZE (NPS)	OUTSIDE DIAMETER AT BEVEL - D.	LENGTH - E.	LIMITING WALL THICKNESS FOR LENGTH - E.	LENGTH E1
1/2	0.84	1.00	0.147	1.00
3/4	1.05	1.00	0.154	1.00
1	1.315	1.50	0.179	1.50
1 1/4	1.66	1.50	0.191	1.50
1 1/2	1.90	1.50	0.20	1.50
2	2.375	1.50	0.218	1.75
2 1/2	2.875	1.50	0.276	2.00
3	3.50	2.00	0.30	2.50
3 1/2	4.00	2.50	0.318	3.00
4	4.50	2.50	0.337	3.00
5	5.563	3.00	0.375	3.50
6	6.625	3.50	0.432	4.00
8	8.625	4.00	0.50	5.00
10	10.75	5.00	0.50	6.00
12	12.75	6.00	0.50	7.00
14	14.00	6.50	0.50	7.50
16	16.00	7.00	0.50	8.00
18	18.00	8.00	0.50	9.00
20	20.00	9.00	0.50	10.00
22	22.00	10.00	0.50	10.00
24	24.00	10.50	0.50	12.00
26	26.00	10.50	-	-
28	28.00	10.50	-	-
30	30.00	10.50	-	-
32	32.00	10.50	-	-
34	34.00	10.50	-	-
36	36.00	10.50	-	-
38	38.00	12.00	-	-
40	40.00	12.00	-	-
42	42.00	12.00	-	-
44	44.00	13.50	-	-
46	46.00	13.50	-	-
48	48.00	13.50	-	-