Ball Valves - American Completion Tools

	Ball Valves

ACT manufactures simple construction full-bore, non lubricated type, three piece, forged concept Ball Valve technology. Soft seat mounted on the ball guarantee that the static spherical seat rings in the body are perfectly tight.

Other special features include:

The operating torque is low whatever the line pressure due to the limited travel of the spherical flanges inside the body.
There is no friction of the soft seat on the seal rings during operation and the packing wear is practically nil.
With the valve open, the seals are protected and relaxed in the body cavity.
Double sealing upstream and down stream assured in each direction by a single seat.
The body can be dismantled even in the case of valves welded to the pipeline.

These are available from 2" to 4" sizes; Welded, Flanged or Threaded ends type. Pressure ratings up to 3000 psi W.P. for normal or H S Service.

Part No. & Weight
FULL PORT		2"	3"	4"
Flanged End	Part No. Wt (lbs)	560-2015x-00 104	560-3015x-00 155	560-3015x-00 266
Screwed End	Part No. Wt (lbs)	560-2015x-02 44	560-3015x-02 71	560-4015x-03 160
Weld End	Part No. Wt (lbs)	560-2015x-03 44	560-3015x-03 71	560-4015x-03 160